Home › Concrete and Driveway Removal
Titan Demolition Orlando delivers efficient concrete and driveway removal services across Orlando, FL. We saw cut and break up driveways, sidewalks, and slabs, then load and haul away all debris. Our team protects adjacent structures and landscaping so your property is ready for new concrete or landscaping.
Titan Demolition Orlando provides professional concrete removal throughout Orlando, FL, Florida and the surrounding area. Our licensed, insured crew delivers safe, clean, on-time work with a free estimate before anything begins. Call (407) 250-9545 or request your free quote.
Concrete and driveway removal in Orlando done the right way
Concrete removal sounds simple until you are standing in front of a cracked driveway or patio wondering how to break it up, get it out, and not damage anything around it. Titan Demolition Orlando focuses on concrete and driveway removal in Central Florida, so we know how to deal with older slabs, sand-based soils, and the mix of city and county rules in the Orlando area.
Most projects start with a site visit. We look at the thickness of the slab, whether it has rebar or wire mesh, where the control joints are, how close it is to your home, pool, or utilities, and what kind of access we have for equipment. Orlando neighborhoods can be tight, with short driveways, mature trees, and HOA rules about noise and work hours. We plan around those details so the job does not drag out or cause avoidable trouble with neighbors.
If you already have a plan for a new driveway or concrete replacement, we match our removal scope to what your installer needs. Some contractors want a clean subgrade, some want us to leave the base material in place. Titan Demolition Orlando coordinates that ahead of time so you are not paying twice for the same work.
How Titan Demolition Orlando actually removes concrete
Once the plan is set, we call in utility locates as needed. Even for driveway removal, we want to know where water lines, irrigation, and low-voltage cables run. In Orlando, sprinkler lines are almost always close to driveways and walkways, and many older homes have shallow buried power for landscape lighting. Finding those first prevents leaks and outages.
For most residential driveways and slabs, we use a skid steer or mini excavator with a hydraulic breaker to fracture the concrete into manageable pieces. Thicker or older slabs that have been overlain with additional concrete sometimes need saw cuts first so we can control how they break. In tight access areas, such as small back patios behind townhomes near downtown Orlando, we may use handheld electric breakers and concrete saws instead of larger machines.
Once the concrete is broken, we load it into dump trailers or roll-off containers. We separate slabs with heavy rebar or steel so they can be processed properly. Titan Demolition Orlando takes the debris to local recycling facilities whenever possible, where it can be crushed and reused as aggregate. This often reduces disposal cost compared to hauling to a landfill.
If the concrete was poured on top of unsuitable fill or has voids underneath, we can strip down to stable soil so your future driveway or patio does not suffer the same fate. On many Orlando lots, the original builder used loose sand as the base. We note that during removal and can rough grade it so your next contractor knows what they are working with.
What affects the cost of concrete removal in Orlando
Concrete removal pricing is driven by more than just square footage. Titan Demolition Orlando looks at slab thickness, reinforcement, access, and how far we need to haul debris. A standard single car driveway with 4 inch thick concrete and basic wire mesh costs much less to remove than a double driveway that was thickened for heavy vehicles, or one with 6 inch concrete and close spaced rebar.
Access is the second big factor. If we can back a skid steer and trailer right up to the driveway, labor time is lower and the job is faster. If your property is in an older Orlando neighborhood with narrow side yards where equipment cannot pass, we may have to use smaller machines, carry debris farther by hand, or stage material in the front. Each of those adds time, and time affects cost.
Disposal and recycling fees in Central Florida also play a part. Heavier, reinforced loads cost more to process. If your project involves removing thick concrete pads, old footers, or demolished block in addition to the driveway, the dump fees will be higher than for clean, thin driveway concrete alone.
Finally, site protection can affect the price. If we need to lay down ground protection mats over grass, protect pavers, or build temporary ramps to cross curbs without damage, that requires extra materials and labor. Titan Demolition Orlando spells out these items in the estimate so you can see exactly what you are paying for.
Common problems we solve during driveway and slab removal
Many Orlando homeowners call us after discovering that their driveway is not just a simple slab. We frequently encounter concrete poured over old pavers, asphalt, or even previous concrete. That layered construction changes how we break and remove the material, and how long the job will take. We explain those findings on site and adjust the plan with you before moving forward.
Another common issue is hidden damage or poor base conditions. When we pull up a slab, we sometimes find washouts from past plumbing leaks, termite tunnels along block edges, or pockets where tree roots have rotted away. Titan Demolition Orlando can lightly regrade or compact low spots so they are ready for your next contractor, and we will tell you if a different trade, such as a plumber or foundation specialist, should address something before you pour new concrete.
Working around structures and finishes is another concern. Decorative garage floor coatings, nearby pool decks, and low stucco walls can all be damaged by careless removal. We use saw cuts at the edges where new concrete will remain, lay protection against walls, and control the direction of breakage so vibrations are minimized around your home. In some cases, especially close to older block homes, we will reduce breaker force and rely more on cutting to protect fragile structures.
For homes in parts of Orlando with a high water table or poor drainage, we pay close attention to slope and existing water flow. Removing a driveway can change where rainwater goes. While we are not a paving contractor, we can help you and your concrete installer think through whether the new driveway should be pitched differently or if a small drain line needs to be preserved or relocated before you rebuild.
What Orlando homeowners should know before hiring for concrete removal
Before you hire anyone to remove a driveway or concrete slab, confirm that they are properly insured and experienced with mechanical demolition, not just handyman work. Concrete removal uses heavy equipment and creates a lot of debris. Titan Demolition Orlando carries the right coverage for this type of work and trains our operators for residential conditions where gas meters, AC condensers, and vehicles are close by.
Ask how the contractor will handle dust, noise, and debris in your specific neighborhood. In many Orlando communities, there are set work hours and parking rules. We schedule noisy breaking during allowed times, keep driveways clear when neighbors need access, and sweep or wash down the street when we are done so there is no leftover mess.
You also want a clear written scope. For example, does the price include removal of the entire driveway apron at the street, cutting and separating any adjoining sidewalk, and hauling away all concrete and steel, or will something be left behind for you or another contractor to deal with. Titan Demolition Orlando lists out the edges of removal, how deep we will go, and the condition we will leave the subgrade in when we are finished.
Finally, think about timing with your replacement contractor. Most concrete installers in Orlando prefer a short gap between removal and repour so the base does not get disturbed again or saturated during rainy periods. We coordinate dates with your chosen installer when possible, and if there is going to be a delay, we can compact and shape the base so it sheds water and stays workable until the new concrete goes in.
